

A 500 litre-per-hour reverse osmosis plant with FRP pre-treatment vessels. It suits factories, hospitals, schools, hotels and housing societies that need drinking-quality water from a borewell or municipal supply.
Used in
Every plant is sized to your water. Send a TDS reading or lab report for exact figures.
Raw water is pumped first through a sand filter, which takes out silt and cloudiness. A carbon filter then reduces chlorine, odour and organic matter. Anti-scalant dosing and a 5-micron cartridge filter protect the membranes. Finally, a high-pressure pump pushes the water through the RO membranes. Clean water goes to the storage tank and the salty reject water goes to drain.
The stages inside every RO plant we build, from raw water to the storage tank.
Step 1
From a borewell, municipal line or tanker. It carries silt and dissolved salts.
High TDSStep 2
Takes out silt, mud and cloudiness.
Step 3
Reduces chlorine, smell and organic matter.
Step 4
Protect the membranes from scale and fine particles.
Step 5
Pushes the water through the membranes.
Step 6
Let water molecules through and hold back most of the dissolved salts.
Goes to your storage tank.
Low TDSCarries the salts out to the drain.
Tell us your water source and how much you need a day. We will confirm the right size and send a quote.